saw components saw duplexer automotive telematics series/type: ordering code: b4411 B39182B4411P810 date: version: june 24, 2014 2.0 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 june 24, 2014 b4411 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n saw duplexer for lte band iii systems n high rx-tx isolation n low amplitude ripple n usable passband 75 mhz features n package size 2.0 * 1.6 mm 2 n package height max. 0.45 mm n rohs compatible n approx. weight 0.005 g n package for s urface m ount t echnology ( smt ) n ni terminals, au-plated n e lectrostatic s ensitive d evice ( esd ) n aec-q200 qualified component family (operable temperature range C40?c to +85?c) bottom view side view top view 1 2 3 5 6 7 8 4 9 0.43 0.33 0.35 0.29 0.7 0.45 max. 7 5 2 6 1 3 8 4 2.0 1.6 0.29 pin configuration n 3 tx input n 1 rx output n 6 antenna n 7, 8, 9 to be grounded n 2, 4, 5 to be grounded 1 6 2,4,5 3 7,8,9
3 june 24, 2014 b4411 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C40 ?c to +85 ?c ant terminating impedance: z ant = 50 w || 3.4 nh rx terminating impedance: z rx = 50 w || 8.0 nh tx terminating impedance: z tx = 50 w characteristics tx - ant min. typ. @ 25?c max. center frequency f c 1747.5 mhz maximum insertion attenuation a max 1710.0 ... 1785.0 mhz 2.8 5.0 db amplitude ripple (p-p) da 1710.0 ... 1785.0 mhz 1) 1) over any 5 mhz 0.8 2.5 db error vector magnitude @f carrier 1712.4 ... 1782.6 mhz evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 1.5 6.0 % vswr tx port 1710.0 ... 1785.0 mhz 1.7 2.1 ant port 1710.0 ... 1785.0 mhz 1.6 2.0 attenuation a 100.0 ... 1565.42 mhz 27 30 db 1565.42 ... 1605.886mhz 31 34 db 1605.886... 1680.0 mhz 17 28 db 1805.0 ... 1880.0 mhz 41 44 db 1920.0 ... 1980.0 mhz 18 23 db 2110.0 ... 2170.0 mhz 30 34 db 2400.0 ... 2500.0 mhz 24 27 db 2620.0 ... 2690.0 mhz 20 24 db 3420.0 ... 3570.0 mhz 10 15 db
4 june 24, 2014 b4411 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C40 ?c to +85 ?c ant terminating impedance: z ant = 50 w || 3.4 nh rx terminating impedance: z rx = 50 w || 8.0 nh tx terminating impedance: z tx = 50 w characteristics rx - ant min. typ. @ 25?c max. center frequency f c 1842.5 mhz maximum insertion attenuation a max 1805.0 ... 1880.0 mhz 3.1 5.0 db amplitude ripple (p-p) da 1805.0 ... 1880.0 mhz 1) 1) over any 5 mhz 1.1 2.5 db error vector magnitude @f carrier 1807.4 ... 1877.6 mhz evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 2.4 5.0 % vswr rx port 1805.0 ... 1880.0 mhz 1.6 2.0 ant port 1805.0 ... 1880.0 mhz 1.5 2.0 attenuation a 100.0 ... 915.0 mhz 50 57 db 915.0 ... 1710.0 mhz 39 42 db 1710.0 ... 1780.0 mhz 42 46 db 1785.0 ... 1790.0 mhz 9 40 db 1920.0 ... 1940.0 mhz 30 35 db 1940.0 ... 2400.0 mhz 37 43 db 2400.0 ... 2500.0 mhz 39 43 db 2500.0 ... 2570.0 mhz 38 41 db 2570.0 ... 3300.0 mhz 34 37 db
5 june 24, 2014 b4411 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C40 ?c to +85 ?c ant terminating impedance: z ant = 50 w || 3.4 nh rx terminating impedance: z rx = 50 w || 8.0 nh tx terminating impedance: z tx = 50 w min. typ. @ 25?c max. isolation between rx and tx a 1710.0 ... 1785.0 mhz 40 43 db 1785.0 ... 1805.0 mhz 35 40 db 1805.0 ... 1880.0 mhz 41 44 db maximum ratings operable temperature range t C40/+85 ?c storage temperature range t stg C40 +85 ?c dc voltage v dc 0 v input power at p in source and load impedance 50 w 1710.0 ... 1785.0 mhz elsewhere 29 10 dbm dbm continuous wave t = 50?c, 5000 h }
6 june 24, 2014 b4411 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-ant frequency response tx-ant (wideband)
7 june 24, 2014 b4411 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response rx-ant frequency response rx-ant (wideband)
8 june 24, 2014 b4411 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-rx
9 june 24, 2014 b4411 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. references type b4411 ordering code B39182B4411P810 marking and package c61157-a8-a64 packaging f61074-v8247-z000 date codes l_1126 s-parameters b4411_nb_un.s3p, b4411_wb_un.s3p see file header for port/pin assignment table. soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of cer- tain hazardous substances in electrical and electronic equip- ment ("directive") with due regard to the application of exemp- tions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
10 june 24, 2014 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
